-
Hi Josh,
when i want to download a fresh base tune for the new firmware 2024.02, the downloaded file has the firmware signature from its predecessor in it:
bibliography author="TunerStudio MS Dev …
-
@pazi88, does the M52 PnP Project is compatible with the latest 202402 release from Speeduino, and does it work with full sequential without the need for custom firmware?
-
Hi!
I updated to latest speeduino stable release, and compiled to 6 injection and 3 igntion channels but some things dont work well
- PWM fan didnt follow coolant temperature curve
- CAN inputs v…
h25r updated
3 months ago
-
I try to connect the speeduino v0.3 with and Arduino mega thru serial3.
Any firmware and possible way and I can't make it work.
Can you help me? Do you have any video upload?
Thanks in advan…
-
Hi I try to use this version of ardustim but can connect with arduino uno , I can upload ardustim.ino to arduino uno or arduino mega via arduino ide, but when open Ardu_Stim.0.04
can connect with ard…
-
Laptop connection on the USB port kills the engine if Tunerstudio or another serial monitor is not running. The outputs will stay off until TS is launched. I’ve tried all variations of the reset con…
-
Hello. I found this on spreduino forums:
http://speeduino.com/forum/viewtopic.php?t=592
It explain how simple is interacting with automatic transmissions (just HIGH/LOW signals for solenoids).
An…
-
Firmware 202207.1 and master as of 10/31/2022 have a bug where Launch Control feature isn't setting the clutch input pin to use internal pullup resistor. I also tested with WMI tank empty input and it…
-
Iv purchased my first speeduino to use on my is300 (2JZ VVTI) to which i'm very excited about (so much potential for my self with learning and the platform itself) the UA4C is a capable board, and wit…
-
if you setup as basic distributor and 8 cyl. it only outputs ignition pulses on ign 1, for a few seconds, then goes to outputting 4 pulses in a row, then skips 4 pulses then repeats continuously. play…