-
Hi,
I am trying to reflash, using the ST-Link V2.
However, I get the following error:
openocd -f interface/stlink.cfg -f target/gd32e23x.cfg -c init -c "reset halt" -c "flash read_bank 0 ZY-M100_L.…
-
# Custom ST-Link V2-1 - Matthew Tran’s Blog!
After my ST-Link V2 clone broke, I scoured the web for a way to build one from scratch. I ended up with a custom ST-Link with built-in UART VCP.
[https:/…
-
**Thank you for giving feedback to the stlink project.**
---
**NOTE: In order to offer sufficient and the best possible support, please read /CONTRIBUTING.md and follow the given instructions _b…
-
Hi, I have been using WeActStudio.Mini STM32F11CEU6 Black MCU for several months with no errors and suddenly today I can't upload anymore.
I have been trying the ST-LINK utility to connect. It conn…
-
I think I am missing something obvious. My ST-Link/V2-1 can be detected by the ST-Link Utility. What are the possible reasons I am having this issue?
-
### Issue Description
I recently purchased a PILA87 kit from Taobao and am preparing to flash the firmware. While reviewing the readme file at https://github.com/qmk/qmk_firmware/tree/master/keyboard…
-
I ran into some issues today trying to flash a RS41 with a genuine ST-Link/V2 programmer instead of the 3rd-party clones I have used before. When trying to flash using openOCD i got the following erro…
-
I am having an issue trying to flash the NRF52832Y board and was wondering if anyone has configurations for successfully doing so.
I tried flashing it using an ST-Link V2 with the default Openocd…
-
Can support ST-Link V2 to download F200A
how to setup on windows ?
-
**Describe the bug**
Hi, I'm making maps of Russia using `geom_sf`, but the height/width ratio seems off. Is there a way to maintain the shape as it appears in a global context?
**To Reproduce*…