-
/ports/stm/mpconfigport.mk
The F4 series receive a blanket number of USB endpoints, but the datasheets reveal a more nuanced story. Shouldn't these be further separated?
0 pairs:
STM32F410xx
…
-
There is a new (?) cheap board family available via aliexpress, which could be a nice candidate for porting.
It is sold under the name "WeAct STM32F405RGT6 STM32F412RET6 STM32F446RET6 STM32F405 STM…
-
Hello
I am trying to develop custom firmware with linx to talk with STM32F446ZE board(BTT octopus V1.1). the board is working using custom firmware built using platformIO, now i am trying to integra…
-
Hello,
You did a nice work. I'm learning how to control a DJI RS3 Pro with a Can-Bus.
I have STNucleo based on STM32F4xx
I have some issues when I do a Build Project in STM32CubeIDE.
Could …
-
Hello:
I have successfully run through the ESP32-SDIO-AT firmware using the SDIO interface (4 wires) in stm32, but the data transfer speed of the AT command is too slow, and sometimes I need to trans…
-
A lot of the new 8-axis printer boards are running STM32F4 chips.
I understand if there isn't time, I just wanted to put this on the map.
[TeensyStep](https://github.com/luni64/TeensyStep) suppo…
ipsod updated
5 months ago
-
MCU: STM32F401CC
I have written an embassy-based keyboard firmware for a keyboard. The firmware works well in Linux. However, the keyboard does not produce anything when the laptop asks for a syste…
-
This issue is based on the translation of deepl
I would like to use custom board with STM32F401 and nrf52840 , I noticed that the NRFPILL on the connections on the stm32f4 are included pb0 , 1, 2, 10…
-
Hi, we try to work with your great library but in stm32f4 and not in stm32l4.
How can we do it?
Thanks.
-
your lib works great on stm32f1 with stm32duino maple official branch, i tried to use it with stm32f407 but could not make work , any configuration required ?