-
Hi everyone
does this library support sx1268?
Thanks
-
**Describe the bug**
The SX1268 does not turn on. The serial output shows that communication with the chip does not occur, as the frequency setting nor gain settings at startup apply. Additionally it…
mph88 updated
10 months ago
-
**Describe the bug**
We are transmitting SSTV in Martin 2 mode from an SX1268. This works as expected on frequencies below 432 MHz. Changing the frequency to anything above 432 MHz (tested up to 437 …
-
Hi, would it be possible to add support for the heltec v3 board. I understand it uses a sx1268 chip
-
Bei der Bestellung der Boards des Lora T-Beams habe ich zwar auf die Frequenz 430MHz geachtet, aber den Unterschied von SX1278 und SX1268 leider am Handy nicht gesehen. Nun habe ich jetzt hier SX1268 …
-
Could we have support for ESP32-S3. Heltec Lora V3 is using -S3 version of ESP32.
j0uni updated
4 weeks ago
-
Hi,
The docs mention support for the "TTGO T-Beam V1 (433MHz SX1278)". Is the 1.1 version of the board also supported? Those seem to be the only ones i can buy on AliExpress. [Link](https://nl.alie…
-
I am using Ra-01s AI Thinker and using sx1268 but the following error occurred ERR_SPI_CMD_FAILED. MY pins configuration would be
`sx = SX1268(spi_bus=1, clk=18, mosi=23, miso=19, cs=5, irq=26, rs…
-
I am trying to communicate two devices. One broadcasting based on Ra-02 Aithinker SX1278 433MHz using arduino-LoRa library (demo sender).
https://www.disk91.com/2019/technology/lora/first-steps-with…
-
### Description of the issues
硬件平台 树莓派4B 系统为烧录工具推荐的 易佰特 lora模块 E22-400M30S SPI链接
![image](https://github.com/hepingood/sx1268/assets/24492495/ea7d04b9-6cb1-4e0b-967d-18b0e335dc25)
![image](https:/…