-
The purpose of this new issue is to track the items necessary for taking the prototype +60 heated bed and turning it into a production-ready design.
_IMPORTANT:_ Please refer to the design document, …
-
Please refer to the new wiki document that I've created, to capture all of the things related to pressure sensing and bad picks:
https://github.com/TinWhiskers/fpd-design/wiki/Research---Pressure-Se…
-
A page has been created to track the optimal TMC2130 settings:
https://github.com/TinWhiskers/fpd-design/wiki/Research---TMC2130-Settings
-
Need to make delta arm length adjustable, since the beta arms weren't fixtured properly.
- Make it an attribute so the serializer can make use of it, if present
- Make it optional, and default to 27…
-
I ~'m planning to~ have deleted the [Freenode-English](https://github.com/orgs/Freenode-English/) org and the [topic](https://github.com/Freenode-English/topic) repo within that.
So it would be hel…
-
This may require making a fixture to mount the cameras into. This fixture may be used at a later date to measure all cameras at the factory, either as a go/no-go type, or, possibly as calibration par…
-
Very important to improve user experience when setting up almost any location in the system.
-
Need to make a wiring diagram of the pneumatics.
All the relevant design information for the pneumatics have been recorded here (please add stuff to it if there's anything I missed):
https://githu…
-
- **Trays:** Felix and I are going to try and schedule some of Laura's time to do a production-ready version of the SMT trays and some lids, and some way for them to attach to the round carousel plate…
-
Cut strip feeder setup should be as simple as clicking near the first dot and the machine would do the rest.