-
Dear fellows,
I have the T-SIMCAM OV2640 and the SIM7600G-H, which has the TP4056 battery charger, this charger only has a blue LED, I've seen other TP4056 that has a green and red a LED to know if…
-
Why using a TP4056 when using a solar panel?
Wemos D1 mini pro v 2 includes a battery charger. Won't it be possible to connect the solar panel directly to the D1 mini pro?
-
Pin 9(exposed pad) its GND pad. This can be found in the [datasheet](https://static.chipdip.ru/lib/848/DOC018848830.pdf)
-
Hey.
In the assembly guide page 7 is shown a tp4056 module similar to the one I have here.
It only has 4 solder holes (in+/- and bat+/-).
However, the pcb also has out+/-.
I can't see clearly in t…
-
_From [bluearc....@gmail.com](https://code.google.com/u/112158384960039030429/) on January 27, 2014 21:25:24_
the footprint seems to be to small
TP4056
_Original issue: http://code.google.com/p/frit…
-
In the pbc layout of version 1.0 there are the following errors:
R23: silkscreen on wrong side (corrected in KiCAD V1.1)
U23: TP4056 ESOB8 instead of SOP8 footprint (corrected in KiCAD V1.1)
MT36…
-
Built a window sensor, everything worked well, started thinking about a v2. Here is what I came up with, take it or leave it.
## Changes
1. Adds a `TP4056` (USB-C here, could also be Micro USB) f…
-
As I'm going to throw in quite some photos, I'm adding a new issue for the TP4056 board so that everybody who opens #12 doesn't have to load all the photos.
 and VCC connected to 5V Vin I can't read out the DHT2…