-
Hi,
I have successfully built my own firmware using the Build.
However, I do not need the RNDIS function, but I require USB storage devices (plugging in a usb flashdrive through the USB otg port).
…
-
How can use Verilog/system-Verilog testbench to verify the function of USB device?
-
**Describe the bug**
Installation process resets and/or disables all USB devices when installing to an USB external device (case with SSD). It seems that it disables USB plugged drives/devices when i…
-
i feel like im so close to getting android on this thing. i even try to run system.img after this was done, in usb transfer mode to no avail. i even tried reinstalling stock firmware (before the ota i…
-
**Describe the bug**
Installation process resets and/or disables all USB devices when installing to an USB external device (case with SSD). It seems that it disables USB plugged drives/devices when i…
-
The NanoD USB needs to be tested on different platforms. In my experience it is not reliable in the following:
- often: shows up as the wrong named serial port "usb140010" or something like this in…
-
Needs some more testing and research, the VSYS rail seems very unstable.
-
With usbipd v4.2.0 this device reboots when you stop giving input signals as seen in the video. You can see it here if you stop rotating the controller the device reboots. As long as you rotate a knob…
-
### Answers checklist.
- [X] I have read the documentation [ESP-IDF Programming Guide](https://docs.espressif.com/projects/esp-idf/en/latest/) and the issue is not addressed there.
- [X] I have updat…
-
Does any one encounter this error?
It show when I try to run this snippet:
My setup:
Jetson Orin
odrive 0.6.8
python 3.8.10