-
1. Stratux version: Latest
2. Stratux config:
SDR
- [x] single
- [ ] dual
GPS
- [x] yes
- [ ] no
type:ublox9
AHRS
- [x] yes
- [ ]…
-
I have installed and attempted to test. The test fails after about 10 seconds. Shown in file 'driver-error.txt'
However, I decided to see if the error was made clear from WeeWX. To my surprise, it ru…
-
I have module from Aliexpress and strange issue, Arduino stops working on " bmp0.begin(); ".
It does not do any different what sketch from the BMP280 library I use.
For example, sketch "scanRawPress…
-
# Designing a Quaternion-Based EKF for Accelerometer, Gyroscope, & Magnetometer Fusion - Michael Wrona's Blog
[https://mwrona.com/posts/attitude-ekf/](https://mwrona.com/posts/attitude-ekf/)
-
There is a Digital pressure sensor become more and more popular in China, model number SPL06-007, manufactured by GoerTek.
Up to 5cm resolution in 64 samples mode.
Also pin-to-pin compatible with th…
-
Temperature sensor is working but intermittently sensor gives -135.9237, 179.63043, -128.93599, 188.4 values continuously for sometime. After some period of time, it starts giving correct temperatur…
-
Hi Kris,
I bought this EM7180 a few days back. I read in its datasheet that you don't need to calibrate magneto in it and I have uploaded your code which has pre-written function for calibration of a…
-
Kris,
please excuse a newbie but I can't get your sketches to fit within a Pro Mini.
I am trying to use 9250 + BMP280 and second set up 9250 + MS5611. Happy to have serial output no screen at thi…
-
Hi Kris,
I'm launching the EM7180_MPU9250_BMP280.ino and get this :
![capture39](https://user-images.githubusercontent.com/26138016/40432191-63520ec2-5ea9-11e8-97ff-9d6e23a52f3e.PNG)
and nothing a…
-
This is the sensors and components wish list:
~~- [x] MQ2 (limited lifetime, comsumes too much power, needs calibration)~~
~~- [x] MQ135 (limited lifetime, comsumes too much power needs calibratio…