-
I am integrating srsRAN DU with RU from Metanoia via OFH interface. So far S-PLANE, C-PLANE and U-PLANE is working more or less stable. Now I struggle with tuning the IQ samples amplitudes, FullScale …
-
Hi mehrdadkhani
wonderful work! I have successfully get 3GPP channel model and use the channel matrices to implement in Onlinetraining. You mentioned in the paper that the key point for MMNet's low …
-
For modulation values greater than QPSK (2 bits), the planner reported max antenna bitrate is incorrect (although the calculated link speed is correct).
When moving from BPSK to QPSK encoding, ante…
-
Hello all,
please anybody can help me on this issue?
When i run the BY70-2 Proxy, and receive the data i do not see any data
in the Proxy window. Please anybody can help me to understand where am i…
-
Hello @btminzon could you help me to check my log, tested with differents models and not work the only in 5G
-
Hi Sylvain,
Thanks so much for creating this updated version! Able to compile and run the new version under Mint 21.1, which uses Ubuntu 22.04 as the base.
Unable to compile using Mint 20.3, b…
-
Hi,
First of all thanks for such a great code. I am grateful that you have decided to publish this as open source.
I wanted to develop a software hosted on Raspberry Pi,
which can catch voice a…
-
I am working on a project where I transmit and receive a BPSK signal using a basic transmission device and an RTL-SDR. The signal is modulated at 1000Hz and was recorded with Gqrx. I can decode this s…
-
After looking at some json files I created SARSAT.json.
It is partially dummy particularly for the decoder.
SARSAT are broadcasting Manchester (a kind of BPSK with a residual carrier) 2400 bauds be…
f6bvp updated
5 months ago
-
Hi, i'm trying to increase tx power of my AR9271 card using ath9k_htc backports 4.0.1 driver + open-ath9k-htc-firmware, but i got this strange behavior:
`iwconfig wlan0 set txpower (from 1 to 17) dBm…