-
I can't seem to get the Mac to run it despite following the instructions. I'm not a power user. My Mac seems to have issues with homebrew which is a project within itself to fix.
-
As the discussion board doesn't allow user registrations at the moment (see [362#](https://github.com/rosflight/firmware/issues/362#issuecomment-541307026) ) I need to ask the question here as there i…
-
#### Issue details
Support for N-Position switches via flexible channel ranges.
Currently the flight mode CH5 is the only that supports fixed ranges for multiple actions (different flight modes)
T…
lvale updated
4 years ago
-
The bootloader appears to include code in:
void writeFlash(uint32_t *address, uint32_t *buffer) // page size is 256 bytes
that allows the flash memory occupied by the bootloader code to be erased/writ…
-
## Current Behavior
The current iNav software does not support TMOTORS Velox Cine boards.
## Desired Behavior
I would like for there to be a firmware that supports the TMOTORS Velox Cine boards.
…
-
@csurf mentioned in #166 about plans to port to the STM32 platform so I though I'd open this issue to share the work I have done in this area and too see if there is any interest in using it.
So he…
-
### Is your feature request related to a problem? Please describe
Gyros like the ICM-42688-P have a CLKIN signal which allows the FC to generate the clock signal.
TDK's datasheet for the ICM-426…
hydra updated
1 month ago
-
Is this possible? I was able to get it configured in Cleanflight but figured since the Naze32 was made for Baseflight I'd go with that. But I am having trouble here.
In CF I used softserial 1 as S.Po…
-
Hi, I appreciate your lib and like to use it to load it for plots, qgis or kdenlive visualisation.
Unfortunatly the blackbox logs created by INAV 3 are .TXT files which cause the error message
> ~…
-
since a370d60 I'm not able to configure softserial ports in configurator. They are not listed on the Ports tab and the feature SOFTSERIAL becomes unchecked after reboot.
My flightcontroller is a Naze…
udvlp updated
9 months ago