-
I have been testing a Heltec Lora V3 running an iGate firmware and powered by USB. I have been monitoring the 12v battery supplying the USB buck convertor. The voltage has been reporting fine and so t…
-
Hi, thanks for the work that you've put into this firmware. It's great.
I'm interested in developing a solar powered digipeater, and the ESP32 based boards are quite power hungry in comparison to t…
sdhuk updated
5 months ago
-
Hey Ricardo!
Is it possible to have an extra option to send battery voltage via telemetry to APRS-IS servers?
Thank you
PU5KNB - Guilherme
-
Raspberry Pi 3
Direwolf 1.6
Command to start
` rtl_fm -f 432.500M -g 22 -o 4 -s 44100 - | direwolf -c sdr.conf -r 44100 -B 9600 - `
After first packet received, CPU increases over 100%. Then …
-
As per the release-announcement for glibc 2.38 () :
```
* The strlcat and strlcpy functions have been added. They are derived
from OpenBSD, and are expected to be added to a future POSIX version…
-
Ever consider using an I2S audio solution so you can feed audio direct to the gpio on the pi instead of the USB method? See [https://github.com/mytechguyri/i2s_audio_phat.git](url)
Then one other …
-
I would like to request the APLH?? dest call for my projects of APRS: igate, digipeaters, WX stations, telemetry devices.
Currently there are some stations in the world working with my HAM solutions …
-
Extracto del README.md
1 = RX iGate, black "L" as symbol
2 = Rx + TX iGate, red "L" as symbol, HAM only. RX will be sent to APRS-IS, Messages will be sent via Lora. Same frequency for RX and TX. B…
EA2CW updated
5 months ago
-
I just installed latest version 2024_05_22 with VSCode (should be the same as the 202_05_23 from web interface?), right procedure FW + Filesystem, my HW is a TTGO LoRa32 V2.1
the use case is sol…
-
The packet sent whith t-echo aren't repeated over rf from digirepeaters because WIDE1-1 is not sent.
RF digipeaters are widely used where there is no possibility of internet but t-echo is ignored