-
Hi all,
I'm currently working on ramps for acceleration temporal and before I forget this I write it down.
I found an issue in timer_set(). The part `(current_counter - match_last_counter)` can be n…
-
### Describe the bug
While dropping Throttle to Zero my quadcopter continues to ascend. Blackbox logs show that Motors 3 and 2 are start at 45% while 4 and 1 are at 0% while Airmode attempts to hold…
-
Are there any plans to increase MSC support here?
CDC+MSC may be great
Thanks
-
@OpenUAS , @EwoudSmeur and I are trying to make the Dshot Protocol work on Ewoud's Cyclone hybrid MAV which mounts the Chimera board with the code created by @alex31 and maintained by @gautierhattenbe…
-
Hey,
I use nudge (https://github.com/zruncho3d/nudge/) and unfortunately I have a problem determining the nozzle position
Z works normally, but as soon as the nozzle triggers on X axis, I get th…
seene updated
5 months ago
-
Hi, just found this project. Don't really have a concrete issue, but some design questions id like to discuss.
Ive recently started work on a similar project in JAX, that tries to use [XPBD](https:…
-
Including a toggle in .h for multiple Z steppers.
This will allow separate settings in TMC options for Z2, Z3, Z4 etc.
-
The thrust of the SRMU appears to be slightly askew. RCS Build Aid reports about 3Nm of torque (more or less depending on SRMU length set) coming from an otherwise perfectly symmetrical stack. This ca…
-
Issue occurred updating to latest firmware TFT70:
After updating TFT 70 to latest firmware in the menu->options->printer->parameters->TMC stealtchop for X and Y is showed value 0.000 even if stealtc…
-
Hi, I encounter the same problem as in https://github.com/facebookresearch/LAMA/issues/10.
And I found the reason why 2 examples are filtered is that the `obj_label` are `1970s` and `1990s`. And in `…