-
Not an issue, but I am not sure where to put a request? I would like to detect when the keypad is pressed so I can make an audible sound? I am using the keypad_textsensor.h and keypadtext.yaml. Is…
-
As soon as I set the speaker tick and the start sound to 0 in the web config, the Multigeiger cries at full volume with its piezo speaker after the following restart.
@ThomasWaldmann fyi, unfortuna…
-
### PROBLEM DESCRIPTION
If you set FIRMWARE_LITE flag you are not able to enable USE_MQTT_TLS option but only editing tasmota_configurations.h
### REQUESTED INFORMATION
_Make sure your have…
soosp updated
3 years ago
-
Hi! My name is Manolo Ramírez, I´m a Mechatronics Engineer from Guatemala and currently studying my Msc in Computer and Automation Engineering with specialization in Robotics & Automation in Italy.
…
-
I have instaled the sketch properly in esp32 cam as a esp CAMERA_MODEL_AI_THINKER, no errors, i have configured the telegram token and the chat id, but the telegram bot doesn´t shows anything... Could…
-
There is any possibility to increase the volume of the piezo buzzer?
-
### PROBLEM DESCRIPTION
_A clear and concise description of what the problem is._
Buzzer just makes low clicks instead of sound wave, SSD1306 does not turn on at all. Both work just fine in 8.…
-
The speaker at https://www.amazon.com/Passive-Buzzer-Speaker-Arduino-Raspberry/dp/B085XQM69Z/ is unavailable on Amazon. Consider adding an alternative link.
-
New to sllurp. I am using a Raspberry Pi to read from a PIR to start the Impinj portal reading...looking for our tags, and if found, flip a flag so that a buzzer sounds...basic security portal.
It …
-
Buzzer just makes low clicks instead of sound wave, SSD1306 does not turn on at all. Both work just fine in 8.3.1.2 compile. Piezo is passive, and will work in 9.1 if you set it as PWM. Will not wor…