-
Hi all,
I bought a board from Aliexpress and it looks like this .
Is this board named k…
-
I'd like to suggest a potential alternative to the Cypress board: [My USB Floppy Adapter](https://github.com/roybaer/usb_floppy_adapter)
It uses the same [STM32F103C8T6](https://www.st.com/en/microco…
-
If anyone could lend a hand porting this to python3/gtk3, I've made considerable progress here: https://github.com/smearle/gym-micropolis/tree/master/micropolis-4bots-gtk3, at the service of an OpenAI…
-
First let me say thanks again for your work in progressing AqualinkD. My Raspberry Pi was knocked out in a lightning storm and I decided to reinstall on an unused laptop I happened to have. I loa…
-
# Proposal: new major version of InfluxDB Go client
## Introduction
For a Go developer, the [Go API client](https://pkg.go.dev/github.com/influxdata/influxdb-client-go/v2@v2.0.1?tab=doc) is like…
-
i have several sublevels which i need to write to with a stream. I was hoping not to have to create a write stream for each sublevel, but a writestream on the root database does not get the data into …
-
Hi @dlouvton , You may help with this. We are using twilio flex as a vendor for our open CTI. In classic we have a method sendCTIMessage() which talks to call center setup(twilio flex) and making a ca…
-
I've been looking at the `pi-parport` project for quite some time, but one thing that threw me off from using it was the number of GPIO pins the hardware interface required, which doesn't leave much r…
-
### Link
https://pl.aliexpress.com/item/1005006306054040.html?spm=a2g0o.order_list.order_list_main.47.195e1c24WRU4my&gatewayAdapt=glo2pol
### Database entry
{"id":15,"type":"EndDevice","ieeeA…
-
I would like to speed up signature verification using ARMv7 instruction set (ARM4 or ARM33 device). Verification takes about 3 seconds with __BLST_PORTABLE__ build. Could you hazard a guess on how …