-
As discussed in [#5469](https://github.com/zephyrproject-rtos/zephyr/pull/5469#issuecomment-373422463), current PWM API prevents dynamic prescaler computation.
Indeed, using get_cycles_per_sec in p…
-
Implement PWM control servos. This should include a wrapper API and a higher level get_angle, set_angle, etc. It should have an init function to configure GPIOs if needed.
https://docs.espressif.…
-
### Klippain branch
- [X] I confirm using the main branch
### Version
v4.3.1-11-g4ff6f5b4
### Describe the bug and expected behavior
The pin aliases for the part cooling fan and the extruder cool…
-
How can I query the PWM output?
-
To save cost, complexity, and a unique component:
- Pull fan PWM to 5V (board gets plugged in, fan goes to 100%)
- Add additional level shifter (TXU0304 or TXU0202) from 3V3 -> 5V
- Use ESP32 PWM…
-
Hi, I have a 6 wire Nidec brushless motor with 24v-Gnd-5V-CLK-BRK-dir. I tried to control it with the MKS DLC32 and I can move it clockwise and anticlockwise using m3 and m4. I can adjust the speed on…
-
Hello.
One question O'm not a developer but if the speed is controlled by ioPIN 12 (Analog) how the PWM based control is made?
-
Отличный проект , могли бы расширить проект и реализовать не только on/off но и pwm ? Или подсказать что добавить переделать в проекте для того чтоб получить pwm сигнал ?
-
I'm not sure but is there anyway to set the greatfet to Pulse Width Modulation? if so could I get a code example?
-
Hi,
First of all: Nice Work!
Question: Is there anything to consider/prepare when using the PWM?. Demo_PWM does compile and starts but there is no signal (anymore). Only a single time there was out…