-
Hello, thanks for the script
I have 2 Shelly 1Plus PM running in Venus OS.
I've only been running the script for 2 days.
But today a Shelly is frozen in the VRM - the display shows 58 watts. But it…
-
Following the instructions on [How to build venus gui v2](https://github.com/victronenergy/gui-v2/wiki/How-to-build-venus-gui-v2#patch-and-pack-the-webassembly-files), specifically *Building for Linux…
-
**Describe the bug**
If the wifi connection is lost the controller reports to my victron that the battery voltage is low.
**Hardware/Software Versions**
Controller version (from PCB): 4.5
…
-
### Describe the bug
the BMS Shows 100% on Both (LltJbd)
the VenusOS 96% and 100%
![image](https://github.com/mr-manuel/venus-os_dbus-serialbattery/assets/6553835/42a0af75-e66e-4110-9ba0-b5d480c9ec…
-
### Describe the bug
While verifying another bug, I came across a new error, which might be related to PR https://github.com/evcc-io/evcc/pull/15544
I'm getting these errors:
`grid currents: re…
tosog updated
2 weeks ago
-
Trying to install GuiMods v10.15 from clean VenusOS v3.30
Setup was conducted from the GUI. No errors. Restart of the GUI was requested, and executed.
Then SetupHelper is still showing GuiMods not i…
-
### Version
0.8.0 (current)
### VenusOS version
v3.50~13 beta release
### Does this issue occur during installation or at runtime ?
Installation
### Is there a Discussion thread for this issue? …
-
I've been thinking about the idea of connecting multiple controllers via CAN with the goal of providing aggregated data to Victron (or Pylontech, etc.) as one large battery. I figured I would open a G…
-
If a string value eg "60.5" instead of float 60.5 is written to a node e.g. "W/"+portal_id+"/temperature/"+device_id+"/Temperature" the connection to VRM Portal breaks and the local running vrmlogger.…
-
Hello,
Great project! I'm new to this so please excuse my lack of knowledge.
Is it possible to use this to add MPP Solar inverter and JKBMS compatibility to Victron VenusOS and/or Home Assistant run…