-
Look at the proteolytic cleavage marker for the interaction near ATF-6 in this pathway: http://www.wikipathways.org/index.php/Pathway:WP2578
-
After building the Orange Pi 5 U-Boot image and writing it to SPI, the board won't boot. The only difference on the serial console is that `atf-1` and similar don't seem to be loaded (see below). It a…
-
```[FAILED] Failed to start the-tool.service.
See 'systemctl status the-tool.service' for details.
[DEPEND] Dependency failed for /sysroot/writable.
[ 10.060839] the-tool[286]: 2023/05/05 09:10:2…
-
Hi,
When trying to build `core-image-minimal` for OrangePi PC2, the `atf` build failed with the following error:
```
make: Entering directory '/media/Embedded/yocto/poky/build/tmp/work/cortexa53-cr…
-
I encountered a build failure while attempting to build the `qoriq-atf` recipe version 2.4. The error message indicates that the build failed while attempting to compile the `bl2.elf` and `bl31.elf` f…
-
This is my rock 3 Model A uboot logs
```
Model: Radxa ROCK 3 Model A
rockchip_set_serialno: could not find efuse/otp device
CLK: (sync kernel. arm: enter 816000 KHz, init 816000 KHz, kernel 0N/A)
…
-
### rAthena Hash
latest
### Client Date
2021-11-03
### Server Mode
Renewal
### Result
rate is being used for status change but it wasn't declared in that instance. Located at Line 1327. Causes…
-
## Type of issue
Bug, probably
## Description
Bid request for Native format fails with an error, trying to set .pos at a `video` object, which for native isn't there.
(Cannot set properties of u…
-
Hi, experts,
In our current environment, we use ATF to load op-tee.pkg, op-tee.pkg is packed by ATF using sp_tool on tee-pager_v2.bin.
The load_address of optee.pkg is defined in the properties of v…
-
would be nice to have quick links in the top nav bar of the landing page
some suggestions from existing `id`:
- `Features` -- link to [#features](https://dub.sh/#features)
- `Pricing` -- link to …