-
### Did you test the latest `bugfix-2.0.x` code?
Yes, and the problem still exists.
### Bug Description
[RonGoodman303_Marlin.zip](https://github.com/MarlinFirmware/Marlin/files/7599558/RonGoodma…
-
Not working with AUTO_BED_LEVELING_GRID_POINTS 2 (probing 2 points and gantry crash to the x-max side).
Not working with AUTO_BED_LEVELING_GRID_POINTS 3 (probing 6 points and gantry crash to the x-max…
-
### Did you test the latest `bugfix-2.0.x` code?
Yes, and the problem still exists.
### Bug Description
I tried to enable G76 to auto compensate probe offset.
I tested send G76 but I got echo:Unk…
-
HI! I'm sorry for using fr for this type of question, im currently new to posting/commenting on github so i apologize if I ramble or do something wrong, but for the life of me I cant figure out how to…
-
_From @RalphSutherland on May 10, 2016 8:13_
HI, I'm working on improving auto-bed leveling, and may add auto mesh bed leveling too. But I, like others apparently, have been confused by the probe of…
-
If `UBL_G26_MESH_EDITING` is required to run `G29`, then why not a sanity check?
I loaded the latest RCBugFix tonight and had `AUTO_BED_LEVELING_UBL` enabled. `G29` simply does nothing but report b…
ghost updated
2 years ago
-
In first sorry for my bad english !
On my prusa i3, the auto bed leveling work great on X axis but never on y axis.
Is it normal or i made an error somewhere ?
Many thanks.
-
At the moment i try to test `AUTO_BED_LEVELING_GRID` with more than 3 points.
With this:https://github.com/AnHardt/Marlin_O/pull/7/files configuration i get an error:
```
SanityCheck.h:195:10: error:…
-
Additional to homing problem #1682
When MESH_BED_LEVELING is used Z axis is scaled and it moves about 1,1 times more when going up, going down there appears there is no problem. I made tests and I thi…
-
Hello Guys.
Im fairly new to 3d printing, i started to learn it about a week ago, because one of my friend has a pruisa i3 and i asked him to print me a model. It turns out, he cant print anymore sin…