-
### Bambu Studio Version
1.7.0.65
### Where is the application from?
Bambu Lab github releases
### OS version
Windows 11
### Additional system information
_No response_
### Printer
P1P
### H…
-
I tried to get answers to these questions several times on other platforms, let's see if I have better luck this time.
What does the flow calibration do exactly?
Does it actually adjust the flow r…
-
### Bambu Studio Version
1.7.7.88
### Where is the application from?
Bambu Lab Official website
### OS version
Windows 10
### Additional system information
Windows 10
### Prin…
-
### Describe the bug
I have a HA intergration with my A1 mini and now also with my new A1.
But for the A1 mini I can see the camera feed but at the 'Sensor list' for the A1 I can't see the camera.…
-
```
[XTOUCH][CONNECTION] Connecting to WiFi ..
[XTOUCH][CONNECTION] Connected to the WiFi network with IP: 192.168.1.106
[XTouch][SD] Reading JSON file: /config.json
Getting accessToken from…
-
### Bambu Studio Version
1.9.7.52
### Where is the application from?
Bambu Lab Official website, Bambu Lab github releases
### OS version
Windows 10 Pro / Version 22H
### Additional system infor…
-
### Bambu Studio Version
1.9.7.52
### Where is the application from?
Bambu Lab Official website
### OS version
Windows 10 22H2
### Additional system information
_No response_
### Printer
Bamb…
-
I have 2 X1C's setup in my configs, but LiveView isn't working. I've confirmed "LAN Mode LiveView" is enabled via the printer touchscreen on both units, and have gone back over my configs, access cod…
-
Please add Printer calibration features as seen in SuperSlicer with the well known models for Bed/Extruder leveling, Filament Flow, Filament Temperature, Extruder Retraction, Bridge Flow, Ironing Patt…
-
Currently, the calibration only perform the calibration of the 1st filament that is used. This is fine if all filaments are by the same make/model/batch and has mininal differences between them. How…