-
As per discussion in #163 with @phretor and @rnbokade, it could be possible to extend maximum packet length beyond the FIFO size limitation by providing user with methods to feed the FIFO "on-the-fly"…
-
I am looking at duplicating the protocol for my Honda key fob, for opening doors, unlocking, etc. It appears to be a simple sequence of 25ms bursts every 100ms at either 313.55 or 314.15 MHz (313.85 +…
-
Hi
I am trying to use this to send an rf signal (433.42 mhz) over a usb duart CP2102 device.
I have the device plugged in to a usb port device which shows up as Cygnal Integrated Products, Inc.…
-
For my application, I have to disable CRC filtering in FSK packet mode.
As a workaround, I changed SX127x.cpp as follows:
In `SX127x::configFSK()`:
`state = _mod->SPIsetRegValue(RADIOLIB_SX127X_R…
-
**Describe the bug**
The bridge it is receiving signals and displaying them in the serial port / forwarding them to the mqtt boker.
When it receives an instruction from the mqtt broker to transmit,…
vspek updated
2 years ago
-
I am creating this issue simply to track some information about deviation. Comments in the code says that Micronet uses an approximately 38kHz deviation. That fits well with a 76.8kbaud rate (+-38kHz)…
-
Goedemorgen,
Mijn gateway valt met enige regelmaat stil. Het enige wat ik kan doen om het weer aan de gang te krijgen is de gateway van spanning te halen. In het log zie ik met enige regelmaat "Rec…
-
Bonjour et merci une nouvelle fois pour ce projet :)
J'aurais quelques questions et suggestions concernant le fonctionnement :
Avec la dernière version (OTA), j'ai remarqué que l'interrogation d…
xekil updated
2 years ago
-
Tag @skotopes & @Skorpionm
Like many others, I backed the Flipper project with the specific purpose of consolidating multiple remote-control and key-code devices into one, especially the frequenci…
-
**IMPORTANT: Before submitting an issue, please check the following:**
1. **Read [CONTRIBUTING.md](https://github.com/jgromes/RadioLib/blob/master/CONTRIBUTING.md)!** Issues that do not follow this d…