-
I'm having a really bad time trying to get a fusion algorithm to work, I've found the sensor datasheet and I belive I got the correct settings through experimentation (everything is on the wiki) but i…
-
Hi, when the first tool is finishes, instead of automatically changing, the spindle first retracts and then slowly feeds until it is to crash into the bed. This is on the Makera Carvera, 0.9.7 firmwar…
-
I am ordering parts now to build the ELS for the Jet GH1340 lathe. The threading shaft is separate from the lead screw shaft and both are configured with several gear selection levers. II haven't foun…
-
While builind PIConGPU 0.4.3 on centos 7 with gcc 7.3.0, there is the following error:
```
picongpu-0.4.3-mhq6gednwt3qidk6ncd7olohrbogiaf4/include/picongpu/ArgsParser.cpp:64:17:'ArgsErrorCode' in
…
-
アイデア 気付き 為になった discussion や notebook など
-
### Check for existing issues
- [X] Completed
### Describe the bug / provide steps to reproduce it
1. install Zed from archlinux repo (both tried on `extra/zed 0.150.4-1` and `zed-git 0.151.0.r67.g…
-
We need to modify the gateway to respond to a Wires-X command to link to a YSF2xxx program with a Wires-X Disconnect to the user and then a Wires-X Connect to the YSF2xxx. The former is easy to achiev…
g4klx updated
4 years ago
-
This issue can be considered done once a few 3d designed models in fusion 360 have been 3d printed with the anticipated outcome.
-
I wanted to open an issue to hold a discussion about a "Reproducability Mode" (https://twitter.com/jakevdp/status/935178916490223616) or "Linear Mode" (https://twitter.com/lexnederbragt/status/93520…
-
Hi all!
I started working with OpenSCAD but some things have seemed challenging for me to do programmatically and wanted to build some features if it would be considered for master branch. If I bui…
samyk updated
10 months ago