-
Hey there,
i try to execute a python script and set a script command with "/home/pi/camcran.py up".
Same i use in system command editor and it works fine there.
But in custom control nothing hap…
-
### Prerequisites
* [x] Put an X between the brackets on this line if you have done all of the following:
* Reproduced the problem in Safe Mode: http://flight-manual.atom.io/hacking-atom/s…
ghost updated
6 years ago
-
It would be nice to have "horizontal" support for small parts on base layer.
Small things trend to not stick enough to hot plate and the extruder movement tears them away (cohesion in filament is big…
-
Hey there !
First, developpers&others, Thank you for the awesome job and Thank You for sharing opensource !
I'm actually using Universak Gcode Platform with cheap cnc shield V3
![cnc_bureaumetal_1…
-
I have been having problems getting rid of blobs when using LinuxCNC to drive my MendelMax. I have finally traced this back to the use of G0 moves combining retract with travel when I select the "Mac…
-
Good Day,
I have had the opportunity now to print a few objects with version 0.9.3, and have noticed a fairly significant drop in print quality.
Printed items now have a significant amount of bandin…
-
Yesterday I installed repetier on my DaVinci 2.0A (jumper J37, `#define DAVINCI 3` and `#define MODEL 1`).
I did a manual bed calibration and it seems to work fine.
But when I tried to upload the Ard…
-
### Version
_Version of Slic3r used goes here_
the latest
_Use `About->About Slic3r` for release versions._
_Do not report Prusa3D Slic3r bugs here without confirming it is a problem on a devel…
-
🔵🔵🔵🔵🔵🔵🔵🔵🔵🔵🔵🔵🔵🔵🔵🔵
Works now ! Read the end of topic
[Dual Y Single nozzle direct drive works on MARLIN with FW enabled '0.6mm height](https://www.youtube.com/watch?v=n3wsoSrxNNM)
🔵🔵🔵🔵🔵🔵🔵🔵🔵🔵🔵🔵🔵🔵🔵🔵…
ghost updated
6 years ago
-
Hi Martin,
you tool is wonderful, makes my little Chinese cnc work as a good cnc =)
It has been a couple week since I am having some troubles though.
The spindle sometimes start to spin and sometim…