-
Hi Denvi,
a. When you press the 'Restore X, Y, Z' button only X and Y are restored. Z should move too.
b. Pressing 'Zero XY' and 'Zero Z' works OK to offset from Machine co-ords. But if you then pres…
-
Flashed my arduino uno with grbl 1.1f then 1.1h but still gets the message "Only GRBL version 1.1 or above is supported" when i connect to my arduino with cnc shield through my android tablet.
Test …
-
So i have been waiting 3 months for MKS to sort their dam firmware out, multiple issues reported on the latest version, I am stuck with an older version and frustrated with waiting are you lot going …
-
I am tryingto upload the firmware to an ESP32 dev module.
Instructions says "Go into the **ESP32 directory** and modify settings in grbl/config.h and CMakeLists.txt as needed. Pin assignments and b…
-
So the current level of support in lasers on other platforms is superb.
Grbl 1.1e has beautiful support for G0=travel moves=beam off, and G1=cut move =beam on
Smoothieware has the same method, w…
-
I have a problem with a laser engraver sculptfun S10 that I can’t solve. I want to use GRBL controller with this laser and it don’t work. I use an Android tablet with Android 11. When I use laser GRBL…
-
I have a gcode file that was generated by flat cam. The gcode is inches and it begins with G20. My Arduino nano with grblv1.1 is set to $13=1. on the GRBL Tab this panel that says "Program limits" di…
-
**Versions**
- Candle version: 1.1.7 and Candle 1.2.15b x64
- Firmware version: 1.1
**PC info**
- OS: Windows 10 Home Single Language, Version: 21H2
- OpenGL version: 4.6
**Describe the bu…
-
I want to use my cnc as 3d printer too by changing the spindle with hot-end. So can grbl mega 5x work for 3d printer machine configuration and 3d printer software?
-
### Version
2.0.12
### Hardware / Firmware
GRBL 1.1
### What happened
The svg file "[Test.svg](https://user-images.githubusercontent.com/8106470/202260360-b0b6993d-41ea-4992-b2ff-cbf55f10479e.svg…