-
### Robot Name 🤖
ergoCub 1.0 S/N:000
### Request/Failure description
In the past couple of weeks, it happened a few times that the motor LED suddenly starts blinking red, and the robot collap…
-
Hi,
Some of the Daly BMS support a connection via can bus. That should be considerably faster than the serial connection. The protocol is also open.
So i was wondering if - technically - this co…
-
s6-rc: info: service s6rc-oneshot-runner: starting
s6-rc: info: service s6rc-oneshot-runner successfully started
s6-rc: info: service fix-attrs: starting
s6-rc: info: service fix-attrs successfully…
-
**Describe the bug**
If the measured current from the INA229 (internal current sensor) is close to 0 then a power of > 70 W is still displayed, since the power is calculated in the INA229 chip the qu…
-
Hi,
I have installed the driver for communication on my system earlier this week and am using this with a Uart port on my JBD BMS.
The Bms was recognized and looked to be working ok, however when I …
-
I build a project,I referred wear_leveling example and gatt_server example; I write some data into a file per 5s,when my android device send data via BLE,then crashed.I check some similar issue and I …
-
![Screenshot_2023-08-30-15-27-44-461_io homeassistant companion android](https://github.com/slipx06/sunsynk-power-flow-card/assets/63303107/5405834c-117c-4cdb-9661-fc845264b44c)
### Is there an exi…
-
I am getting the following error if I try to extract WiiU Just Dance 4 files:
![image](https://github.com/MZommer/LYNTml/assets/132097847/0d6bae45-0d15-46b1-bd32-b97c5b0c32b7)
The PS3 version is t…
-
Hi Community,
since today my dashboard is frozen wit the status 'FAIL'.
I've already restarted the docker host, recreated the images & restarted the battery unit. Any help on what I should do …
-
Add an on alarm on BOL frame timeouts and VE.Bus BMS frame timeouts.
See https://www.victronenergy.com/live/mppt-error-codes#err_67_-_bms_connection_lost
Multi firmware >= 502 supports a BOL fram…