-
**Motherboard Revision:** REV03 beta
**Issue Description:** The LCSC/JLC part which was specified is [C15857](https://lcsc.com/product-detail/Power-Inductors_Sunlord-SWPA8040S220MT_C15857.html/?hre…
-
subj
-
Anthony (Motorhead1991) 9:44 PM
Any reason we're still using microUSB and not type c?
9:45
Just curiosity
Simon - Orchardperformance 9:46 PM
Cost basically
9:46
Usb c options were limited…
-
Hi Matthew,
I am having an issue that would love to hear your feed back on. I generated the JLCPCB files and when i got the pcbs a few components were not placed on the pcb. I contacted jlcpcb an…
-
Shall we use JLC SD card?
-
We have reports of two or three kinds of Hellen boards failing to reboot into DFU via "reboot_dfu" command
Same reboot to DFU procedure could be initiated by rusEFI console using "Program" button w…
-
如题,PCB制造是否对工艺有要求。
在JLC下单时是否需要特殊工艺勾选选项。
-
Issue Type: Bug
1. Set WSL (or some version of Windows Subsystem for Linux) as you default terminal.
2. Close VS Code.
3. Open VS Code.
The font is abnormally spaced, and the cursor does not a…
-
Attempted to order the PP_RX from JLCPCB but ran in to a problem that instructions did not cover.
Gerber file, bom file and cpl file loaded to jlc however the item of PAD_1MM kicked out saying it …
-
Now we have identified a number of fans that can deliver the required airflow we can now develop our power delivery circuitry to support it.
One of the fans we have identified (CUI CBM-979533B-154…