opulo-inc lumenpnp issues

opulo-inc / lumenpnp

The LumenPnP is an open source pick and place machine.

GNU General Public License v3.0

2.29k stars 310 forks source link

issues

Newest

Newest Most commented Recently updated Oldest Least commented Least recently updated

Protection on the sensor inputs to the micro

#728 reesesm2000 opened 3 weeks ago
0
Pneumatics plumbing inconsistencies

#727 asm308 opened 1 month ago
8
Please send be DIY build guide doc link if possible.

#726 hemangjoshi37a opened 1 month ago
3
Tightens Hex Nut Pockets on X-Gantry-Back & Y-Gantry + Updates Nozzle-Rack

#725 lucian151 closed 1 month ago
0
reduce noise by replacing large decoupling capacitor footprints with smaller ones

#724 Ruskuls opened 2 months ago
0
Ringlight U1 (SN74AHCT1G32), wrong JLCPCB part number

#723 skuep opened 2 months ago
1
ring light: fix wrong part number in bom

#722 arkeet opened 3 months ago
0
Merges cad-staging into main for v3.2.1 release prep

#721 lucian151 closed 3 months ago
5
Check for Inductor Whine

#720 solarmax1 opened 4 months ago
0
Rotation Stepper Runaway Heat

#719 neatstranger closed 6 days ago
7
Error while reading machine.xml in new configuration v3.2-01

#718 kheygetyan closed 4 months ago
8
Starting BYOP build, which release should I print?

#717 rxs621 closed 4 months ago
1
v3.2.0 Release Prep - Integrates consolidated feeder slot design and other misc changes

#716 lucian151 closed 5 months ago
0
Fixes #714

#715 G-Pereira closed 5 months ago
1
JST SMD Vertical connector does not fit top camera mount

#714 G-Pereira closed 5 months ago
0
Update FreeCAD to 0.21.2

#713 G-Pereira closed 4 months ago
0
Front leg idler mount - Screw does not sufficiently reach nylon section of the lock nut

#712 G-Pereira opened 5 months ago
0
machine,xml error

#711 goodmandj opened 5 months ago
0
Is proteus vsm based pcb supported in lumenpnp?

#710 hemangjoshi37a closed 5 months ago
2
Where is 3d assembly design files ?

#709 hemangjoshi37a closed 5 months ago
4
Add reverse-current protection to supplies (mobo)

#708 dan-gies opened 6 months ago
3
Include board ID on rev5 mobo

#707 konkers opened 6 months ago
6
Use USB specific ESD protection package

#706 warasilapm opened 6 months ago
5
Remove I2C MUX and use 2nd I2C Port for Vacuum Sensors

#705 KC0D closed 5 months ago
2
Thermal pads on motor drivers have thermal reliefs

#704 dan-gies opened 6 months ago
0
SMT connectors are weakly mounted

#703 dan-gies opened 6 months ago
1
REV05 USB Shield Termination

#702 andrewortman opened 6 months ago
1
Add PWM Capability to MOSFET outputs (Fan Outputs)

#701 warasilapm opened 6 months ago
5
Missing GPIO Header

#700 sphawes closed 2 months ago
1
Proper Motherboard Enclosure

#699 sphawes closed 2 months ago
3
Electromagnetic Compatibility

#698 sphawes opened 6 months ago
5
Pololu Standard Stepper Drivers are Costly and Time Consuming

#697 sphawes opened 6 months ago
1
Too Many THT Components

#696 sphawes opened 6 months ago
1
XGZP6857D extact version on mobo Rev.04

#695 jarija opened 7 months ago
0
Fix build-marlin.yml to use correct folder names

#694 stuartpittaway opened 7 months ago
0
Broken wires to the rotation-axis motor

#693 martin-vitek closed 6 months ago
1
Printed Parts Revision Information

#692 AzureOz opened 7 months ago
2
Mobo Fuse Identifier

#691 AzureOz opened 7 months ago
0
Introduces x-cable-chain-bracket-alt

#690 lucian151 closed 7 months ago
0
3.1.0 Release BOM links to non-rotary pneumatic adapters which are not what is in 3.1.0 designs

#688 nathanaelhuffman closed 7 months ago
0
Updates front-left-leg to Use M5 square nut

#687 lucian151 closed 8 months ago
0
Drag Chain specified in 3.0.5 BOM has wrong mounting foot print

#686 rmhorwitz closed 1 month ago
2
Strip Feeder Standardization

#685 lucian151 closed 9 months ago
2
Rev 4 Mobo has a schematic labeling error for X, Y limits

#684 troth530 closed 8 months ago
1
Hello, every time you reopen Openpnp Feida's slot address: None, you need to click Find to display the slot address

#683 84864797 closed 4 months ago
1
FIx STL artifacts zip inside zip

#682 G-Pereira closed 4 months ago
0
Unable to compile Marlin 2.1.2.1 using the configuration file (REV4)

#681 84864797 opened 10 months ago
2
GITHUB action dependancies need updating to node16 from node12

#680 stuartpittaway opened 10 months ago
0
Folder "ftp-backups" should be removed from GITHUB repo

#679 stuartpittaway opened 10 months ago
0
Merges cad-staging to main for LumenPnP v3.1.0 release

#678 lucian151 closed 10 months ago
5