-
Hello,
I am trying to configure my 2 home panels.
I am using PowerMax Pro (2 diferent firmware versions because one auto enrolls and other stays standard mode)
Arm/Disarm and all panel info (in…
-
Hi!
I am not sure where to best ask this question, I hope this is the right place :)
Thanks for providing this excellent framework. I am working on a mini-simulator for an example satellite on-boa…
-
In my recent trials with pyglider+seaexplorer, I noticed that the underwater positions for the most recent missions are a bit funky, and after some digging I realized it's because of a (somewhat recen…
-
Not a major issue as you've said you've got several others on the way for testing, but the link to the motor you used is now out of stock: [AliExpress](https://www.aliexpress.com/item/1005001384349991…
-
Hi,
For a future version, it would be better if you could swap the Vcc (3.3V) and GND on the pins row:
```
[... | 15 | 14 | Gnd | Gnd ]
[... | 04 | 02 | 3.3V| 3.3V]
```
to this instead
```
…
-
### Issue details
I try to use my computer to connect the mavros in a Raspberry pi but the connection couldn't established.
The ROS_IP and ROS_MASTER_URI for both computer are correct.
I also…
-
1. Stratux version: stratux-v1.6r1-eu028-32d5e58b-us
2. Stratux config:
SDR
- [ ] single
- [X ] dual
GPS
- [ X] yes
- [ ] no
type: u-blox M8
AH…
-
Hey there!
First off, thanks a bunch for your appreciation for the work on the OnePlus 8 series! 😊
👋 I've been digging into the open-source code, and I hit a bit of a roadblock. It seems like af…
-
I am using a Badger 2040 with what I believe is the latest firmware.
Filename: pimoroni-badger2040-v0.0.3-micropython-with-badger-os.uf2
I have noticed that there is sometimes a vertical banding (…
G8PTN updated
8 months ago
-
**Describe the bug**
A clear and concise description of the bug.
Setting mode to Autoland from Offboard causes the drone to yaw to 180 and then yaw back to the current setting while landing. This ha…