-
I've connected (R503 to WEMOS D1 mini) everything as described here and I have "Did not find fingerprint sensor :(". LED ring on R503 glows for about 1s and in the same moment error appears.
Any cl…
-
Hi,
How can I use firmata for Arduino Nano Every???
I really need it for this version of arduino (NOT adruino nano or micro)...
I already tried to add these codes to "Boards.h" file but a lot of …
-
In the following blocks, there is used initialScale=0.06 without obvious benefit.
- Modelica.Blocks.Interfaces.PartialBooleanMISO
- Modelica.Blocks.Interfaces.PartialIntegerMISO
- Modelica.Blocks.I…
-
Hello,
I'm trying to use mraa (v1.9.0-46-g47728b4) in python to get data from ADS8318 ADC in Daisy Chain Mode on Ubuntu 14.04 3.19.0-25-generic. I'm able to open the SPI device in mraa with dev = m…
mrapl updated
6 years ago
-
- [ Y] This issue complies with the [issue POLICY doc](https://github.com/esp8266/Arduino/blob/master/POLICY.md).
- [ Y] I have read the documentation at [readthedocs](https://arduino-esp8266.readthe…
-
Thank you for shared impressive project. I want to used wifi 2.4G/5G , the only esp32c5 compatible.So, I used the esp32-p4 chip for mcu host , and esp32c5 via sdio connected to esp32-p4 sdio port. How…
-
## Description
The built in datetime class is faster and less error prone than arrow so we should migrate to fully using datetime instead of arrow in our parsers.
This probably needs to be done in…
-
_From @shiftleftplusone on July 14, 2015 19:52_
would it be possible to add Hardware-SPI libs for TFT displays, working also with the Due ?
I'm using Henning Karlsen UTFT libs so far, but unfortunate…
-
I get errors like below all the time when I try to upload with the ShareFile-NET SDK.
Tons of I\O errors and I don't know why. My upload code is as simple as this:
_logger…
pduer updated
3 years ago
-
- [ ] Backup/restore data from Firebase
- [ ] Fetch all fortunes (and save) on boot
- [ ] Attempt connect on coin (toggle __offline)
https://github.com/mobizt/Firebase-ESP8266/#backup-and-restor…