-
I have an X-Y only application where I need to be able to power down the stepper's hold current while not in use. But I need them to stay put for a few seconds at least after the last command. My "t…
-
Evening folks,
I recently got my hands on a PiFace Digital 2, however, I'm struggling to make my Raspberry detect it.
Following the instructions found on the [official page](http://www.piface.or…
-
Btt ups doesn't work on versions above 2.0.5.
I was able to compile and run it with Marlin version 2.0.5, but it doesn't work stable. I could not manage to run it on higher versions.
-
This issue will automatically convert a Grbl_Esp32 machine definition file to FluidNC YAML format.
Change YOUR NAME in the title to some string that identifies your machine configuration.
IMPORT…
-
-
I discovered on tracespace.io , pcbway and pcbgogo websites that the Gerber X2 files (both layers and drill ones), are not fully supported, some layers are not recognized.
![Screenshot at 2020-11…
-
hey, interessting project,
but one question, why you not use the glow plug as flame control like the orginal?
-
### Did you test the latest `bugfix-2.1.x` code?
Yes, and the problem still exists.
### Bug Description
I have a CR-10 S5 with a Creality mainboard v2.2. It runs on Marlin 2.1.2.3 with `BOARD_RAMPS…
-
### The problem
The problem is that after every press of the HA button, the code works well, turning on my computer. But exactly 1 minute after, the relay activate for like 6 / 7 seconds, turning off…
-
Hey Karl,
I was looking through your code and noticed you had a few typos in the key values for the following:
https://github.com/kw123/SHELLY/blob/5263e7691655020edc0681ef4156db622eb12492/shell…