-
Anyone got fastled running on the latest esp32 code ?
Thanks
-
How can I save and reload trained models?
I tried to pickle them, but it does not work.
I would like to train once and then use the trained model in another python file to predict data points.
Than…
-
Suggest looking into if possible to replace ESP32-C3 SoC with ESP32-C6 in next-generation of WiCAN hardware for the future.
https://www.cnx-software.com/2023/01/12/esp32-c6-wifi-6-ble-802-15-4-modu…
Hedda updated
12 months ago
-
Thanks for sysbox, it's great!
I'm having an issue with files inside sysbox container appearing with nobody:nogroup.
Strangely, not all files, but some.
I have read several issues here, and i'm l…
-
Processing esp32cam_seeed_xiao_esp32s3_sense (board: esp32cam_seeed_xiao_esp32s3_sense; platform: espressif32; framework: arduino)
--------------------------------------------------------------------…
-
I have built a MidTBot ESP32 plotter described at: https://github.com/bdring/midTbot_esp32.
Everything is OK except reading the micro SD card in the WebUI panel.
Why is the content of the SD card no…
-
### Wiki Search Terms
Soft limit error. ALARM:2 Soft limit alarm.
### Controller Board
Xpro V5
### Machine Description
Ultimate Bee 1515 220v 2.2kw water cooled spindle.
### Input Circuits
_N…
-
### The problem
Under the binary_sensor / rc_switch_raw we can define our own rcswitch protocol, but cannot use the code value, it's just a binary_sensor afterall.
Under remote_receiver / on_rc_…
-
Well, pretty much what the title says. The programs starts out OK, and after 1-4 (usually 1 or 2) VAN packets it crashes with abort() and a corrupted backtrace. It can crash mid-print sometimes
14:…
-
Hi,
I am finding a problem with this library when using more than 4 steppers with an ESP32-S3.
I have four steppers working (using TMC2209 driver chips and the TMC2209Stepper with UART control) …