-
Hello everyone,
First-off, I tried to post the question in the Discuss forum, but the registration link is broken and the new post editor is kind of broken as well, popping weird messages.
So here…
-
```
MacBook-Air:ublox brandon 2023-08-02 13:05:13 $ cargo run --bin ublox_cli -- --port /dev/cu.usbmodem1301
Compiling ublox_cli v0.1.0 (/Users/brandon/Desktop/ublox/ublox_cli)
Finished dev …
-
This the ublox 7 configuration:
updatespeed := []byte{0x64, 0x00, 0x01, 0x00, 0x01, 0x00} // 10Hz=100ms, cycle=1
and this is the ublox 8 configuration:
updatespeed = []byte{0x06, 0x00, 0xF4, …
-
Please add GPS power saving as used in RS41HUP (UBLOX_POWERSAVE). The batteries last much longer needed for floating HAB's.
-
### Describe the bug
The Jeti Telemetry is broken. RC Link works fine but the Telemetry does not.
I Use the Classic mode for flashing. If i use Build Configuration the Baro is missing too.
### To…
-
I'm having a huge problem with the library using the Arduino GIGA R1 WiFi.
I have a system made up of GPS, IMU and SD card and I would like to connect to a peripheral.
if I load the example progra…
-
I am having some issues getting any output on serial output after configuring the RP2040 board (QT Py). I also have an ELRS receiver attached and connected to a transmitter.
I have attempted multi…
-
Ḯm using a zed-f9p and i would like to receive correction data from an ntrip caster, so i need a ntrip client and then apply the received correction. I found this related [pr](https://github.com/Kuma…
-
Hello Mstrens,
I continued with the tests this morning,
I discovered the following:
Ver.2.8.33 FBUS or S.PORT with SBUS Protocol,
Sensor lost messages set to 5 second delay.
LOG=255 everything el…
-
## Current Behavior
The 7" Quad is flashed with regular INAV 6 and since then has changed dramatically in behaviour after disarming as after landing properly. I looks like the quad doesnt figure that…