-
Board flashed firmware fine. I connected 24v power, and all of the stepper/fan/endstops, and now it will not connect again. I have reflashed, I have remade my RaspPi's os. I have tried every usb port …
-
### Board
ESP32 S3
### Device Description
It's an ESP32 S3 WROOM from Freenove. It's got 2 USB C ports, one camera connector. https://store.freenove.com/products/fnk0090
### Hardware Configuration…
-
im not even sure what im doing wrong. all i know is that while i can upload code to the rp2040 usb host feather fine, after i have done so i cannot get the serial monitor to work. i tried using putty,…
-
**Describe the bug**
A raspberry pi Zero in HID gadget mode cannot wake host computer.
**To reproduce**
Enable `dwc2` driver and reboot:
```sh
echo "dtoverlay=dwc2" | sudo tee -a /boot/confi…
-
**You must attach a Vysor Bug Report Link** **---> I do not know how to trigger the bug: shall I first upgrade to Vysor Pro?**
Hi,
I found your app while browsing the web: my Samsung A70 fall …
-
Research cellular receivers that we could buy for Pi. This would allow us to SSH to the boat while it is on the water and lets us reboot the boat or send shell commands to the boat. This would also le…
-
Hello everyone
I am currently creating a jtagice3_*** compatible firmware that works with the AVR-DU series. It can be recognized as USB-HID + USB-CDC using only the standard drivers for Windows an…
-
### Description of the issue
Since upgrading to 1.39.0-1 I cannot access Zigbee2MQTT's frontend, getting "502: Bad Gateway" instead. Other addon frontends are accessible via ingress. There's nothin…
-
In its current condition it resets the whole usb driver after numerous errors if device is unplugged. The correct code is available in latest kernel but in your obsolete version it absent. The fix is…
k1tzu updated
6 years ago
-
May be you could add the correct socat command to your README and help others with a local serial device to use your work.
```
LISTENPORT=12055
LOCAL_DOCKER_BRIDGE_IP=172.17.0.1
USB_SERIAL_DEVIC…