-
Our Daikin heatpump has two relays for smart grid connectivity.
I am not sure if this is even within the protocol, but could this project support the smart grid features as well?
-
Good day!
I would like to monitor multiple Altherma units connected to the same HA and MQTT broker.
Unfortunately, the current code hardcodes all MCUs connect to the same topic.
I would like t…
-
have installed a daikin brp069a62 on to a daikin altherma monblock system with a room thermostat
unit comes on line and is seen by home assistant
but only the Hot water cylinder is seen and all…
-
Hi, is it possible to integrate the "Powerful" (leistungsstark) button from the Onecta app into Home Assistant so that you could activate the water heating directly from Home Assistant?
-
On the main page "how to calculate CoP, it is stated in the formula to use Leaving Water *before* BUH R1T (as that is a common sensor across Daikin models it would seem)
![image](https://github.com/r…
-
Hallo, ich nutze WaveShare Esp32-S3 sowie Waveshare SN65HVD230 CAN Board an einer daikin altherma 3 R ECH2O (EHSX08P50DA3).
Die Einstellung für Warmwasser Soll bezieht sich ja auf die Temperatur de…
-
Hallo,
ich habe eine Altherma 3H HT.
Adapter Version 0.3.0.
Normalerweise sind die Werte unter den setpoints die Sollwerte die geändert werden können.
Wenn jedoch das onOffMode Flag auf false gese…
-
I was wondering, can the presented module work without a Daikin control module attached to the P1P2 port? I have an Altherma 3 without central module but with external thermostat that just gives an on…
-
Hi,
What is the actual meaning and use case of the `dataType` member in the class `LabelDef` (https://github.com/raomin/ESPAltherma/blob/ebc7757dab8fa4b319b8bda0fd45d13b39724c3e/include/labeldef.h#…
-
Configuration file:
[config_entry-daikin_residential_altherma-2d7d5b56ffd7de32b7ce575dd4729bb7.json](https://github.com/speleolontra/daikin_residential_altherma/files/14627563/config_entry-daikin_r…