-
**Describe the bug**
I am trying in every single point of the library and my code to change the pwm frequency but it doesnt change.. The motor screems really hard at 550hz..
**Describe the hardwa…
-
Hi,
I'm using AMT103 encoder for my project as well. I'm here to ask if anyone has the same issue as mine.
I checked the DIP switch of the encoder, it should be the expected PPR number as I set…
-
This bug happened while trying to solve this issue: https://github.com/simplefoc/Arduino-FOC/issues/364
**Bug description**
BLCDDriver6PWM function needs 6 pins, With a specific pin I am able to bu…
-
hello there,
I'll briefly explain the problem and how you can fix it.
[Problem]
If more than one HallSensor is used, all modes that use ```getVelocity()``` from HallSensor go crazy.
You can…
-
Hi all,
I've been chasing down a bug in which a motor + encoder + driver has poor performance when the sensor is in the CCW direction, but has good performance when the sensor is in the CW directio…
-
in this example:
examples/hardware_specific_examples/DRV8302_driver/6pwm_example/encoder/full_control_serial/full_control_serial.ino
Line 32:
BLDCDriver6PWM driver = BLDCDriver6PWM(INH_A,INH_A, INH…
-
### Verify steps
- [X] 我已经在 [Issue Tracker](……/) 中找过我要提出的请求 I have searched on the [issue tracker](……/) for a related feature request.
- [X] 我已经仔细看过 [Documentation](https://github.com/ZhuYanzhen1/…
-
Hi. Is there a posibility to control a inverter motor from an external ac unit using arduino and a SD30M60AC?
The SD30M60AC is a 3 phase full bridge driver perfect for the job.
I tried this code:
…
-
Hi,
I am planning to use [XESC](https://github.com/ClemensElflein/xESC) with Simple FOC firmware.
I tested hardware with XESC test firmware and it works ok.MCU can communicate with TMC6200 and i als…
-
Part 2 of this issue, continued from here: https://github.com/arduino/ArduinoCore-renesas/issues/139
Please lets keep it to the relevant parts for the issue, and have any conversation around it her…