-
### What happened?
I've been using the following build command for about a year
```
./compile.sh build BOARD=nanopi-r2s BRANCH=current BUILD_MINIMAL=yes KERNEL_CONFIGURE=no RELEASE=bookworm HOST=…
-
N1用U盘刷了Armbian_24.11.0_amlogic_s905d_noble_6.6.50_server_2024.09.10,每次重启mac地址变更。根据网络上修改NetworkManager方式,修改/etc/network/interfaces方式,均无法生效。重启mac地址必变。
在系统中使用armbian-config配置固定IP后导致显示设定的IP,但是SSH访问不了。
…
-
When I install on of these versions (newer then Nov 14) (v1.9-1-3381696 or v1.9-1-b5d7972) armbian becomes super slow. The mouse takes 5 seconds to refresh its position and takes more than 10 seconds …
-
3x-ui安装完成后,在终端输入x-ui命令不出现脚本菜单,不知道什么情况。
![image](https://github.com/user-attachments/assets/83c859a7-9245-432d-8716-62be0f31b6c1)
-
I am unable to get HDMI output audio to work on any [Armbian builds for this board](https://www.armbian.com/radxa-rock-5-itx/) (including nightly), whereas it works on the [Radxa-supplied Debian b6 bu…
-
**Device Information | 设备信息**
- SOC: [瑞芯微rk3399]
- Model [cdhx-rb30]
已发现错误:在替代tn3399和fine3399的6.1.109的bookwarm固件的dtb后刷入emmc不开机,日志有umount /tmp错误之后直接循环重启,sd卡可以启动tn3399固件但usb3.0口不驱动,其余还是/tmp报错后重启。…
-
### Task description
mt7623 has been bumped from 4.19 to 6.6 in https://github.com/armbian/build/pull/6902, but not tested on real hardware.
Assigning @adeepn as discussed in https://github.com/ar…
-
Hi Aaron,
hope you are doing great.
Just wondering: I run the cams on small armbian based pis and have your fantastic sw installed on some VM.
Just wondering - how to move config from one in…
-
hi installed the gpio python from asus and i am using the latest version of nodered and armbian and i press complie the node says stoped and when i sen a 1 as payload it says this in the log "31 Jan 0…
-
Hi! First of all, thanks for the help so far!
Now, my situation: I have a rk322x which is pretty slow for everything on android but videos. So, I installed Ubuntu 20.04 on it (Armbian project). Ke…