-
I have a MagicHome RGBW LED strip where the white LED is neither cold nor warm, but pretty neutral. The default firmware uses the red and blue LEDs in addition to the white channel to mix the proper t…
-
I would recommend, before developing HAL further, we should concentrate on improving the SVD and PAC so we have a better foundation. I generated the docs for the PAC, and I can see there are:
- No/…
-
Thanks to the @btsimonh hard work, we have added a PowerSave command some time ago.
This enables lower power mode on T and N, and it seems to work well, as long as you don't have the Web App conso…
-
**Describe the problem you have/What new integration you would like**
A new [`native` / `host`](https://docs.platformio.org/en/latest/platforms/native.html) platform target to compile for.
**P…
-
**Describe the bug**
After programming and resetting with Bootpin open, the device seems to be stuck. There is no AP to connect to. The COM port shows no log at all, when starting. After flashing bac…
-
### Description
BL602 can't be compiled accroding to the instructions on this page [here](https://nuttx.apache.org/docs/latest/platforms/risc-v/bl602/index.html),I tried changing the toolchain to ver…
-
# Daily Hacker News
1. [**Apple camera design from iPhone 6S Plus to the 12 Pro Max (SAMPLE) [pdf]**](https://www.systemplus.fr/wp-content/uploads/2021/06/SPR21553_Camera-Module-Comparison-Vol.-2-…
-
Hello,
I ordered two WB2-12F development boards, hoping I would be able to flash them with OpenBeken.
This is the board: https://de.aliexpress.com/item/1005004911487557.html
Unfortunately I did …
-
I have merged I2C codes because they were just copied in a nasty, non-optimal way.
I have SM2135 and BP* bulbs, and I will test new system well, but it would be still useful to know that there is som…
-
Hello,
This is not an issue, more of a thanks & a question of what are the limitations?
I first cloned the ...bl602-boufallo-arduino and hesitantly compiled and then downloaded to a DT-BL10. Magica…