-
"Place Eddy Approx. 20mm above the bed.
From Mainsail or Fluidd run command LDC_CALIBRATE_DRIVE_CURRENT CHIP=btt_eddy
Type SAVE_CONFIG to save the drive currant to your config"
This did not work …
-
### Is your feature request related to a problem? Please describe.
Attempting to build Marlin for my board (BTT SKR3 STM32H723VG) on my ARM64 laptop (Pinebook Pro running Debian, VS Code + PlatformIO…
-
Is it only me who has this problem of poor design? optoisolation LE357C. In tests it receives
`probe accuracy results: maximum 0.046484, minimum -0.431641, range 0.478125, average -0.148594, median…
-
good day .
i have recently purchased a BTT Mini UPS 24V V1.0 for and Ender 3v2 to help this with back up power to pause the print.
i have followed the instructions for the connection of the BTT M…
-
I installed the latest version of the plugin. I have it setup on a RPI4 it will show the filament is moving then run the number to negative and then pause the print right at the start. I will a fake f…
-
I would like to add BTT/TRX or BTT/JST to the options.
Thx
-
### Did you test the latest `bugfix-2.1.x` code?
Yes, and the problem still exists.
### Bug Description
I installed two BTT SFS 2.0 on my IDEX printer, these are smart filament sensors with e…
-
Hi everyone!
The device's folder suddenly disappeared from the network. Blue led doesnt
Here is the console log
Delay...
begin SD failed
Fatal exception 28(LoadProhibitedCause):
epc1=0x402093…
-
Hi, I would like to connect my btt mini12864 to my board. I've seen some tutorial for the skr mini e3 v3, but none for the skr e3 dip v1.1.
Anyone would know how ?
-
This board has short circuit issues with 12v power and USB connection, the usb should be isolated from the power, this appears to be a design flaw. And since BTT doesn't answer to issues or provide an…