-
### Controller Board
6-pack with 2x4 Input's & MosFet
### Machine Description
Test Station 3 Axis
### Input Circuits
```yaml
Default Setting / and User setting's
```
### Configur…
-
Did a version of the board (in Kicad) that does sensorless, all that was added is 3 small high voltage fet's, an ADC mux, and a bunch of caps/resistors.
See attached photo .. motor runs well at ful…
-
Hi~~
I have already implemented the board , and now I am trying to understand the library, but I have some part I can't understand, could you help me to explain it , thank you very much.
![messageIm…
-
# Description of the Issue
It seems that for some reason when using CircuitPython firmware the thermocouple ADC takes far too long to collect temperature readings.
# Example of the Issue
-
Hi!
Thanks for creating this project.
We have a Balboa GS500Z connected to a CalSpas 407T panel.
The PCB has RJ connectors and one 8-pin Molex.
The documentation shows the pcb: https://www.b…
-
can i get pcb design?
-
https://swexpertacademy.com/main/talk/solvingClub/problemView.do?solveclubId=AZC_w6Z6yygDFAQW&contestProbId=AV4suNtaXFEDFAUf&probBoxId=AZDJUP6q-fwDFAVs&type=PROBLEM&problemBoxTitle=4d_recommend&proble…
-
This afternoon, after some wiring changes, the ESP32 stopped to work correctly. The board is still recognized by my computer but I'm not able to flash it with the arduino ide. I tried with other compu…
-
Hallo Kris,
I'm working on my research project and I made a custom board with the ESP32 chip, it also includes some sensors like: MQ4,MQ7, TTP223B, MPU9250 and so on. When I get the board, the other …
-
waiting for circuit board