-
### Bug Description
First LCD flashed, also worked end line came.
New design is also on it
After that Marlin flashed, no function, I can press LCD and new windows go up but nothing moves, no …
-
I'm having an issue with a cnc lathe, where the homing cycle doesn't finish after x first finds the limit switch.
The weird thing is it'll do each axis individually ($HZ and $HX) correctly, but the …
-
For some time, I have been looking into ways of improving the current resonance test offered by Klipper, which runs vibrations of different frequencies and measures the printer response. I had some ri…
-
TMC2209/TMC2226 only the package is different. All other parameters are exactly the same.
The uart of tmc2209/tmc2226 supports addressing, and the address is set by ms1 and ms2:
![1](https://githu…
-
**Feature Request**
SuperSlicer has become the slicer of choice for Klipper users. One of Klippers best features is input shaping, allowing printers to move dramatically faster.
Input shaping has …
-
"An error was detected while sending '$H': (ALARM:9) Homing fail. Could not find limit switch within search distances. Try increasing max travel, decreasing pull-off distance, or check wiring. Streami…
-
### Version
2.3.55.2
### Operating system type + version
Windows 10 64
### 3D printer brand / version + firmware version (if known)
Corexy / Klipper
### Behavior
Hello. Artifacts appear o…
-
I want to add 2.5w ttl/pwm laser module to my corexy plotter.
https://goo.gl/images/2awCuV
1. What is the best method TTL or PWM?
2. What is the Wiring digram of TTL and PWM?
3. How to supply…
-
Would it be possible to get back .txt output type? What I did was, I built embroidery machine from old 1950 era sewing machine. Against all odds it actually works, slowly, but it gets the job done. Wi…
-
### Did you test the latest `bugfix-2.1.x` code?
Yes, and the problem still exists.
### Bug Description
On a 3D printer with `SWITCHING_TOOLHEAD` enabled, if a hotend offset is set using `M218 T1 X…