-
i built a firmware for ESP32 GENERIC S3 (ESP32-S3-WROOM-1)
python3 make.py esp32 submodules clean mpy_cross BOARD=ESP32_GENERIC_S3 DISPLAY=ili9488 INDEV=xpt2046
by using this command.
binary file c…
-
Hello Wolle,
when i power up the radio, In the BT menu, the Volume is always at 31. if i change it, it work at different value but it does not retain or save that value like it does when in radio …
-
There are some challenges with getting the code to run correctly on the most popular ESP32-S3 dev boards sold on AliExpress etc. First of all, where possible, you should order the N8 version, which wi…
-
### Answers checklist.
- [X] I have read the documentation [ESP-IDF Programming Guide](https://docs.espressif.com/projects/esp-idf/en/latest/) and the issue is not addressed there.
- [X] I have up…
-
Version 2.0 of [ZumoComSystem](https://github.com/NewTec-GmbH/ZumoComSystem) is expected to use an ESP32-S3 as its microprocessor. The main reason for this is due the USB-Host capabilities of the chip…
-
After a long search i goy this. Now i can use in esp32 s3❤️
-
I' having some issues trying to use the CAN library with my ESP32-S3. When I run the ino file it gives me these errors .
**new bugs : C:\Users\gag_a\Documents\Arduino\libraries\ACAN_ESP32\src\AC…
-
I have reinstalled 5 times activating only ESP32-S3, ESP32-S2 and ESP32-S3, ESP32 and ESP32-S3, all ESP32 series and whatever the case, it is always the same result: in IDF target menu of Espressif ID…
-
Board: LilyGo T-display S3 --> Board manager setting: "ESP32S3 Dev Module" with the right Tools settings
Arduino IDE version: 2.3.2; CLI Version: 0.35.3
TFT_eSPI version: 2.5.43; previous version: 2…
-
the device not booting up shows nothing after fresh the firmware, tried several times, no luck
esptool.py --chip esp32-s3 --port /dev/cu.usbmodem2301 --baud 115200 write_flash -z 0x1000 acid-drop_v…