-
There are very low cost STM32 that don't even require an external oscillator to be used with USB.
__Note: We are not making this change for the V1.0 hardware. The Crowd Funding campaign will rely o…
esden updated
2 years ago
-
I would like to control 2 hoverboard motors for a custom wheelchair project using web interface . I already have simple web interface for ESP32 microcontroller which is simple joystick which output 2…
-
反馈bug/问题模板，提建议请删除
## 1.关于你要提交的问题
Q：是否搜索了issue (使用 "x" 选择)
* [ ] 没有类似的issue
## 2. 详细叙述
### (1) 具体问题
更新了源码编译了，还是一样不启动，是不是不适合5.4内核？
### (2) 路由器型号和固件版本
小米4A千兆版
### (3) 详细日志
OpenW…
-
Hi, very interesting Sketch! Thanks for sharing.
I could compile it successfully but after entering the seetings it does not connect to wifi and after restart the settings are gone. This is the debug …
-
## My Board:
I have another board with another different layout 😅
### Layout of Board A (Master):
![PXL_20230308_235227882](https://user-images.githubusercontent.com/25057949/223879988-d608eebd-…
-
Please add support for BL602/BL604 made by BouffaloLab
> The BL602 is a general purpose microcontroller based on the “SiFive E24 Core” RISC-V processor.
Notice that it's only _based on_ the SiFi…
-
### Tool
nanoff
### Description
When using command:
`nanoff --update --target ESP32_S3_ALL --serialport COM18 -v diag`
Nanoff is unable to flash device (or it take long time? I've waited only f…
-
Hi,
I've installed the esp-open-sdk on my linux.
The previously version that I've used was the SDK V1.5 and with this version working my esp12 without any problem.
Now for a new project I've insta…
-
**Describe the bug**
Does not heat as expected.
Brand new just unpacked miniware TS100 device. On the stock 2.20 firmware it heats well.
**To Reproduce**
1. Plug the power, screen shows value …
-
The docs for the Lemp12 state that it has a "Macronix MX25L25673G flash chip". Is this really correct?
Both my machine and the image in the docs (https://tech-docs.system76.com/models/lemp12/img/co…