-
I noticed that on "Outputs" if I have lets say a temp alarm that turns on an output above some temperature, that once it turns on, it does not turn off once it drops below that temperature again.
I…
-
https://parts.rheem.com/product/RPD-EEWRA631GWH
Have a gas water heater, econet doesn't have a RJ11 instead just a 3 wire connection, guessing power+ground+data/1wire.
-
Right now the heater type is not supported in this plugin, it would be great to be able to add it as a thermostat in homekit and enable heating when dropping below a certain temperature. I have the he…
-
Basically as stated in the title. I want to make an ESP32 based climate control device that controls a heater and a humidifier with a PID algorithm. The question is dose rainmaker support inputting hu…
-
hello
I modify **CUBEPRO DUE**, it have inside **CIRRUS60** heater, already can control it with bed heater on lcd menu.
I trying to instal **DHT11**-**DHT21**-**DHT22** to **skr 1.3** with screen in…
-
Hello everyone,
I have a Dyson Pure Hot+Cool Link™ HP02 purifying heater + fan, and after migration to the ha-dyson component, I lost control of its Oscillation.
![Screenshot 2024-01-25 at 1 46…
dieu updated
7 months ago
-
I have an [UltraTemp](https://www.pentair.com/en-us/products/residential/pool-spa-equipment/pool-heaters/ultratemp_high_performanceheatpump.html) heater from Pentair. I'm using the [Nixie PoolControl…
-
Could it be possible to not use the Mainboard CPU?
1. Measure timing information on the PORT D heater pin for light, medium and dark roasting profile
2. Connect a Raspberry Pi to the TRIACS, heate…
-
### Prerequisite
- [X] Yes, I've read the readme completely.
### Cache
- [X] Yes, I've cleaned accessory cache and the issue still exists.
### Version
1.7.0-beta.51
### Device Infomation JSON Fi…
-
For the control process to have as few dependencies as possible, it writes its status as a file in tmpfs. This is then turned into statserv values for graphing by the intermediate `water_heater_status…