-
**In order to use HDZero video system with the new 2.6 digital MSP Ca…
MrMap updated
6 months ago
-
## GPS signal found/lost
Is there anyreason why I got a warning
```
MSG: [inav] GPS timeout
```
or
```
MSG: [inav] init ref: 55.7533950, 37.6254270, 0.0000
MSG: home: 55.7533950, 37.6254270, -0…
-
## Current Behavior
After crash and lost rx signal, failsafe RTH procedure starts engines and try to fly back home, but it is not possible because quad is stuck in bushes or other crops - this is a r…
-
Currently is gimbal sensitivity possible to set only in configuration tab in inav configurator, it's not possible to change sensitivity durring flight. My suggestion is make possible to change gimbal …
-
When connected to Inav 2.5 when I delete blackbox log the screen says may take up to 20 seconds then once you click confirm the small box goes blank and doesn't erase the log without letting it stay b…
JCFPV updated
3 years ago
-
I have downloaded iNAV and installed it on my MacBook Pro. iNAV seems to work OK up to the point of flashing my SpeedyBee F405 WING APP. After clicking on the “Firmware Flasher” tab, I am seeing messa…
-
The battery capacity in the third telemetry screen is labeled as `mAh` even if the fw is set to `mWh` for flight time estimation purposes.
iNav's CLI settings to refer to are `battery_capacity` & `…
-
I would like the arming status to be sent in Tmp1 like INav does.
-
There are many new radios like Radiomaster TX16S and Jumper T16, T18, with multiprotocol module. They do not have classic SPort output. Ok, they have it in the module bay, but it is not convinient to …
-
I'm using a Mateksys F405CTR with 6.1.0 Inav FW, and running iNav configurator version 6.0.0. Whenever i connect my fc to iNav, in the setup tab the quad just flips constantly in random directions, so…