-
I've found that I'm able to `print` via Swift on my esp32c*, but I cannot figure out how to read serial input.
Is this built into Swift at all, or do I need to drop into c calls?
-
i just could not find a loader for my device.
Here the Hash i could receive via edl.exe
Found EDL 9008, handshaking... version 2.1
HWID: 001350e100200000, JTAG: 001350e1, OEM: 0020, Model: 0000…
-
Hi,
I'm trying to adapt some of the https://github.com/pulp-platform/riscv-dbg/ files for my purposes.
In there there is a declaration of a class with a typedef inside:
class riscv_dbg #(
pa…
-
Was just reading over jtag.c and noticed this:
https://github.com/BusPirate/Bus_Pirate/blob/b580ca9dcda14b7c64b6be2ed1b4b376366b1738/Firmware/jtag.c#L102-L108
Should that be `words > 250`? It wi…
-
Hello @enjoy-digital,
I wanted to utilize the risc-v debug module provided in `core.py` within `litex/litex/soc/cores/cpu/cv32e40p` https://github.com/enjoy-digital/litex/blob/76a704377fbd2897a5ab…
-
https://www.corelis.com/education/tutorials/jtag-tutorial/what-is-jtag/
-
The Heltec V3 comes with the ESP32 S3 which does not seem to be explicitly supported yet. Communication over the USB port utilizes the CP210x so it works. The S3 specifically has an additional USB JTA…
-
PlatformIO Core.
Configuration
Operating system: WIN 10 64bit
PlatformIO Version : 6.1.15
Description of problem
ESP-Prog is not working with ESP32 DOIT Kit v1 using PlatformIO. The issue …
-
There is a `calloc` warning/error returned from line `1476` in `src/jtag/drivers/ulink.c`:
```c
tdo_buffer_start = calloc(sizeof(uint8_t), scan_size_bytes);
```
The error causes a warning mess…
R055A updated
3 weeks ago
-
https://www.ti.com/tool/SIMPLELINK-OPENOCD
Not sure if TI's fork is upstreamed already but theoretically we should be able to bitbang JTAG for CC1352P on the Pi with this, after linking the solder …
omerk updated
3 years ago