-
Hey @robinaidev, tell me about batteries in electric cars
-
I posted this on the open energy forum, not sure if it was supposed to go there or here. advise and I'll delete the wrong one.
Need a little help here with a few things;
1) I run an odd sized ba…
-
Hi @stuartpittaway
During my setup i was thinking it could be extremely useful to have one more rule for overvoltage / undervoltage. In my case i use two relays towards the Victron inverter, one to …
-
I have 13 controllers and 182 cell monitors and is a pain to monitor all , I have to open 13 browser pages , remembering 13 ip`s , etc.
Currently only one is talking to the inverter via can bus but …
-
### Platform
ESP32
### Description
On heltech v3 there is an onboard chip that takes care of charging. SH1.25-2. From the looks of it, it can be reprogrammed and it has its own memory, etc.
Th…
-
Hello, I'm trying to adapt the software to the 20S version. Unfortunately it does not work. This BMS has two bq76930.
So far I'm trying to communicate only with the first. I found the pins connected…
-
I have 55V set as fully charged voltage. And tail to 3 amps. It hit 55V, stayed around this voltage for 1 hour. Now inverter is going into "Float" at 54.50V. SoC is still 105%
 …