-
Hi sir,this project is great, i connect a gps moudule with gpio 17 and gpio 18, i put maps with (13 14 15 16 resolutions) into sd card.
I can get the gps location and display maps on the screen, i ca…
-
## Overview
In the current dev branch we had some minor issues
## Log output
```cpp
In file included from lib/gui/src/notifyBar.hpp:17,
from lib/lvgl/src/lvglSetup.hpp:20,
…
-
This issue is to separate desktop PCIe here /issues/4 and m.2 variants
Dual Edge TPU to m.2 adapter is possible in following configurations:
- m.2 A+E key 2242. This form-factor is non-standard (s…
-
>To minimise effort to resolve issues the following should be provided as a minimum:
>1. ESP32-S3 parallel does not work
>2. Adruino IDE
>3. Latest from Guthub
>4. Board Package Arduino ESP32 Vers…
-
There is some inconsistency in the Lolin S2 Mini plate.
The chip itself may have freely configured pins as i2c, sleep, uart, and the tile itself has no descriptions, only numbers.
Some of the …
bato3 updated
3 months ago
-
I have 4.3' TFT touch screen module from Makerfabs https://www.makerfabs.com/esp32-s3-parallel-tft-with-touch-4-3-inch.html. I am trying to use the DF2301Q module with the TFT module but it does not w…
-
Compilation crashes on this one in the example with the GFX lib versions 1.3.8, 1.3.7, 1.3.6, 1.3.5, 1.3.4, 1.3.3, 1.3.2.
Works on 1.3.1. Please make it availible as well on newer GFX lib versions
…
-
Each Coral product has been tested with specific hardware and software versions.
\
These development systems must be connected to a host computer:
Product | Host Operating System
--------- …
-
Setting `build_src_flags` to anything doesn't pass the flags to the compiler on esp32 boards. Creating the issue here because the same configuration does compile on `platform = atmelavr` and `board = …
-
I use as CW input the option SETUP > DSP > CW a COM with RTS/DTR as trigger input. I defined this as secondary and activate unter OPTIONS Sidetone (tick on). CW working correct, but I don't hear no si…
dl1bz updated
6 months ago