-
Hi,
I am struggling for integrating Taoglas GPS with mRo v2.1.
I confirmed the GPS is powered and working well with Ardupilot.
But the problem is Taoglas GPS is not powered with any PX4 version.…
-
Why is the NEO-M8N recommended over the NEO-6M (in the README)?
I have a preference for the model that comes with the built-in OLED (NEO-6M), but I'm not clear on what trade off I'd be acceptin…
-
**Describe the bug**
Tbeam T22_V1.1 with Meshtastic (v1.0.0 and older) sends invalid GPS position messages to the network, when the NEO-M8N GPS is unsynced, ignoring the GPS `FixType` and `PDOP` read…
-
There's now a HAL published on crates.io: [`embedded-hal`][] ([Introduction blog post][brave-new-io]). :tada:
[`embedded-hal`]: https://docs.rs/embedded-hal/0.1.0/embedded_hal/
[brave-new-io]: htt…
-
Hi,
I installed your software on my TTGO TBEAM (T22 v1.0 20190612) - I cannot get a GPS fix; connection to TTN works fine (I forced checkGpsFix() to true - and it sends packages).
I know that th…
-
Hello,
I get random OK/NOK on state.satsVisible object, it disappears and reappears a lot of time, I use 10Hz refresh rate, my NMEA look OK, some GPS are OK, some GPS I get the "blinking" satsVisib…
-
Hi,
I tried to use the command files in the data folder for ublox M8N but these failed to work. There was no ubx output.
I finally managed to get it working reliably with the following commands at s…
-
Just wondering if my receiver (ublox NEO-M8N) is good enough for galmon.
I am operating it under Ubuntu 18.04 and it seems work with screen:
```
sudo screen /dev/ttyACM0 9600
$GATXT,01,01,0…
-
## Current Behavior
Drone is up and running and has a GPS fix and is ready to arm. After a soft restart it clains that it cannot arm because of missing GPS fix, although it has a fix.
## Steps to …
-
The calibration does not show the 30 seconds any more.
Calibration does not work.
After it stopped the values are still 0 after save and reboot.
The compass seem to work. Just the graph is not show…