-
When setting up, everything appeared as expected but nothing for the built-in light. Also, there were two toggles for "Pool" (the main pump) and they both do the same function (flipping one on flips b…
-
I think that the mass flow rates in the `singlezone_commercial_hydronic` testcase should be revised.
We have unsuccessfully tried to do an identification in this model, and the main issue we saw i…
-
What an amazing project, really good work!
After having set this up I experience some strange behaviour, see below for more details.
Information from tub on status (heater on/off, tub temp, light …
-
So, for ease of use, had to make the Dockerfile pull the aqualinkd-docker.cmd and aqualinkd.conf from my local repo for easier builds, and added at the bottom of the aqualinkd-docker.cmd the following…
-
Is there value in a working list ?
Some ideas to start:
- [X] 2X text in menus. My aging eyesight isnt compatible with 0.96" displays!
- [X] Configurable display timeout. After 'n' seconds …
-
**Describe the bug**
My cpu fan controls are not working anymore since V199.
I have a liquid cooler. I can see both Pump and radiator fans rpm, but i can't force their speed.
**Is there a log.txt…
-
There is a way to autotune pid by pumping white noise (of all the frequencies) into a system, then identifying the system using matlab, and using matlab to further give us PID values.
https://www.…
-
What do I enter here, I want to bring in tank temperature and control it in home assistant. I have Eddi as separate immersion controller, octopus won’t integrate smart grid.
I have 4kW Daikin heat…
-
Hi folks,
I use Toshiba Home AC Control app to monitor and control Toshiba Estia heat pump (indoor device HWT-1101XWHT6W-E, outdoor device HWT-1101HW-E). The indoor unit is not equipped with a buil…
LFC86 updated
1 month ago
-
Hi there, couple months back an [Amber heat pump](https://www.ithodaalderop.nl/nl-NL/professional/product/03-00764) was installed in our house. This heat pump has a control module which doesn't have a…