-
- [x] The issue is present in the latest release.
- [x] I have searched the [issues](https://github.com/brocaar/chirpstack-gateway-os/issues) of this repository and believe that this is not a…
-
I am planing to make a PicoRX-breadboard and I have a couple of questions:
![PicoRX-scan](https://github.com/user-attachments/assets/ac7cbf72-5d64-4163-9f51-b54bc4655092)
Is this the correct value…
-
The setup assumes the radios will tune exactly to the beacon frequencies. I am not sure if the new radios will be equipped with TCXOs and calibrated on all 5 bands.
It might be advantageous to be abl…
-
When testing OpenRTX on my UV380 with GPS, It seems that frequencies around 476-477 MHz, the Australian CB frequency range, (within the 400-480 MHZ range the radio is supposed to support) the radio w…
vk7js updated
11 months ago
-
### Category
Hardware Compatibility
### Hardware
Heltec v2.1
### Firmware Version
2.3.9.f06c56a
### Description
Device: Heltec V2.1
Firmware: 2.3.9.f06c56a Alpha
Error: E (29334) gpio: gpio…
-
When we die, the radio remains connected on the current frequency, although we no longer have the item in the inventory, so we hear people connected on the frequency but we cannot speak because we do …
-
Hi there,
I'm trying to compile the firmware for the ESP32-C3 and a SX1278 (my goal is to make the cheapest RNode possible)
![image](https://github.com/user-attachments/assets/64e8ae6c-f71f-47ae-845…
-
It seems that klog is only checking the rig mode when the band changes. On 60m we use USB. I have all the regular frequencies in memories. When I switch from an 80m frequency to a 60m freq the mode in…
-
I've recently noticed that if I let an AudioPlayer (disc) song finish and I try to play another one after it, it will not be picked up.
Order I've tried:
Insert Disc > Let Song Play > Eject Disc > T…
-
As I continue to test the bar-chart dilaogue, I ran into a problem caused by how the back to back option works under different radio buttons, It works well when navigating from value to frequency and …