-
**In raising this issue, I confirm the following:** `{please fill the checkboxes, e.g: [X]}`
- [X] I have read and understood the [contributors guide](https://github.com/pi-hole/pi-hole/blob/master…
-
-
Hello all, I am running a fresh install of Rasbian on Pi Zero W and using waveshare 2.7in e-paper HAT. Whenever I run "python3 -m pip install -r requirements.txt", it throw me this error:
` Faile…
-
**Describe the Problem**
Previously running 0.2 without any problems, ran the upgrade script last night. Program will run correctly on screen (7in5_V2) but will not advance beyond the first frame.
…
-
Please consider removing the "&" character in the path. This makes it very hard to use these libraries with Pip/Pipenv.
Thank you for your help!
This may have been changed, but snuck back in at…
txoof updated
3 years ago
-
the 2.3 display has a comprehensive demo code for using th edisplay, however the 7.5 v2 display only has a display image demo, can you please include a demo for partial refresh and writing words etc
-
Arch Linux ARM
```
[parker@dslrpi c]$ make
gcc -g -O0 -Wall -D USE_WIRINGPI_LIB -D RPI -c ./lib/Config/dev_hardware_SPI.c -o ./bin/dev_hardware_SPI.o -lwiringPi -lm -D DEBUG
Assembler messages…
-
When compiling with optimization (change -O0 into -O in CFLAGS) I noticed segmentation fault at example program completion.
I tracked it down to a return-address corruption, caused by array overflow …
-
The instructions to Install from a new image install and get to run at boot.
```
sudo raspi-config
#Choose Interfacing Options -> SPI -> Yes to enable SPI interface
sudo reboot
```
Wait for…
-
Currently the drivers don't support this HD color version. Could you please add a driver for this?
SKU: 17960
Part Number: 7.5inch HD e-Paper HAT (B)